manualshive.com logo in svg

Kontron CG2100, Руководство по установке и обслуживанию

Поделиться
Скачать
Kontron CG2100 Скачать руководство пользователя страница 81

 

 

 

 

 

 
 

 

80 

 

 

Key 

Description 

If 

Yes

 is selected and the 

Enter

 key is pressed, all changes are 

saved and Setup is exited. If 

No

 is selected and the 

Enter

 key is 

pressed, or the 

ESC

 key is pressed, you are returned to where you 

were before 

F10

 was pressed without affecting any existing values. 

 

6.2

 

Upgrading the BIOS 

The upgrade utility lets you upgrade the BIOS in flash memory. The code and data in 
the upgrade file include the following: 

•

 

On-board system BIOS, including the recovery code 

•

 

BIOS Setup Utility and strings. 

•

 

On-board video BIOS, SCSI BIOS, and other option ROMs for devices embedded on the 

server board. 

•

 

OEM binary area 

•

 

Microcode 

•

 

Splash Screen 

Preparing for the Upgrade 

The steps below explain how to prepare to upgrade the BIOS, including how to record 
the current BIOS settings and how to obtain the upgrade utility. 

NOTE: In the unlikely event that a BIOS error occurs during the BIOS update process, a 

recovery process may need to be followed to return the system to service. See 
Section 1.4, “Additional Information and Software” for additional information. 

Obtaining the Upgrade 

Download the BIOS image file to a temporary folder on your hard drive. See Section 
1.4, “Additional Information and Software” for more information. 

Note: Review the instructions and release notes that are provided in the readme file 

distributed with the BIOS image file before attempting a BIOS upgrade. The release 
notes contain critical information regarding jumper settings, specific fixes, or 
other information to complete the upgrade. 

Updating the BIOS 

Follow the instructions in the readme file that came with the BIOS upgrade. When the 
update completes, remove the bootable media from which you performed the upgrade. 

Note: Do not power down the system during the BIOS update process! 

6.3

 

Restoring BIOS Default Settings 

If you are not able to access the BIOS setup screens, you may need to restore the BIOS 
settings to their factory defaults.  This procedure requires physical access to the 
inside of the server. 

1.

 

Power down the system but do not disconnect the power cord. 

2.

 

Open the server. See ”Removing the Chassis Covers”, in Section 3.2 for 
instructions. 

Содержание CG2100















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды