manualshive.com logo in svg

Kontron AdvancedTCA AT8001, Руководство пользователя

Поделиться
Скачать
Kontron AdvancedTCA AT8001 Скачать руководство пользователя страница 2

 

i 

AT8001 User’s Guide

Customer Service 

Contact Information:

    

Kontron Canada, Inc. 

    616 

Curé-Boivin 

    Boisbriand, 

Québec, 

Canada 

    J7G 

2A7 

 

    Tel: 

 

(450) 

437-5682 

     (800) 

354-4223 

    Fax: 

(450) 

437-8053 

 

 

 

 

E-mail: 

[email protected]

  

 

Visit our site at:

 

 

www.kontron.com

  

 

© 2005 Kontron, an International Corporation. All rights reserved. 

The information in this user’s guide is provided for reference only. Kontron does not assume any 
liability arising out of the application or use of the information or products described herein. This 

user’s guide may contain or reference information and products protected by copyrights or patents 
and does not convey any license under the patent rights of Kontron, nor the rights of others. 

Kontron

 is a registered trademark of Kontron. All trademarks, registered trademarks, and trade 

names used in this user’s guide are the property of their respective owners. All rights reserved. 
Printed in Canada. This user’s guide contains information proprietary to Kontron. Customers may 
reprint and use this user’s guide in other publications. Customers may alter this user’s guide and 
publish it only after they remove the Kontron name, cover, and logo. 
Kontron reserves the right to make changes without notice in product or component design as 
warranted by evolution in user needs or progress in engineering or manufacturing technology. 

Changes that affect the operation of the unit will be documented in the next revision of this user’s 
guide. 

Содержание AdvancedTCA AT8001









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды