Kontron Embedded Computers PCI - 960 Скачать руководство пользователя страница 21

Страница: 21 / 86

9. Jumpers and Connectors Overview

PCI-960 – User’s Manual (V1.02)

9.1.2.3.

JP5: Disable CMOS Backup Restore Function

This jumper prevents the use of CMOS backup (in the case that the CMOS data are invalid). Set jumper (JP5) prevents,

that wrong settings of the backup are loading. The system boots using the “power on defaults” from onboard RAM.

In order to change a jumper setting, please turn off the computer and unplug the power source to the

board. Otherwise, the board could be damaged.

JP5: Pin Row, DIP 2-pin

Setting

Function

Pin 1-2

Open (Default)

CMOS Backup-Function is enabled

Pin 1-2

Short/Closed

CMOS Backup-Function is disabled

9.1.2.4.

JP1: Power Supply Configuration

The power button is used to switch the system between the off and on state. If the JP1 jumper is set, the ON/OFF

function of the power button is ignored, and the system is always ON (power supply).

JP1:-Pin Row, DIP 2-pin

Setting

Function

Pin 1-2

Open (Default)

The ON/OFF-button switches the system ON or OFF. (ATX

Power Mode)

Pin 1-2

Closed

The function of the ON/OFF-button is ignored.

System behaviour: like an AT-system.

9.1.2.5.

JP2 and JP3: Jumpers for COM2 Configuration as RS422 or RS485

The serial port COM2 (RS232 default setting) can be configured in the BIOS setup RS422 or RS485.

The JP2 and JP3 jumpers allow you to connect or disconnect the termination resistors (120 ohm) on / from the serial port

COM2, when the operation mode in the BIOS is set to RS422 or RS485.

When installing the board at one end of the network, JP2 and JP3 jumper caps must be installed to

connect the 120 ohm termination resistors.

In RS422 mode, both jumper caps (JP2 and JP3) must be installed to connect the 120 ohm line

termination resistors.

JP2:-Pin Row, DIP 2-pin

Setting

Function COM2 (RS422)

Pin 1-2

Short/Closed

RS422 with connected termination resistor

Pin 1-2

Open (Default)

RS422 without connected termination resistor

JP3:-Pin Row; DIP 2-pin

Setting

Function COM2 (RS485 or RS422)

Pin 1-2

Short/Closed

RS485 or RS422 with connected termination resistor

Pin 1-2

Open (Default)

RS485 without connected termination resistor

The serial port COM2 (RS232 default setting) can be configured in the BIOS setup RS422 or RS485.

Refer to BIOS settings for COM2 configuration as RS422 and RS485.

Содержание PCI - 960























































































Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды

Kontron Embedded Computers PCI - 960, Руководство пользователя

Результаты поиска

Содержание PCI - 960

Отзывы:

Похожие инструкции для PCI - 960

Бренды по названию

Популярные бренды