3. Safety Instructions
PCI-960 – User’s Manual (V1.02)
5
3.
Safety Instructions
3.1.
Safety Instructions for the Lithium Battery
The PCI-960 board is equipped with a Lithium battery. For the replacing of this battery please observe the instructions
described in the chapter 10.1.4.1 ”Replacing the Lithium Battery”.
Caution!
Danger of explosion when replaced with wrong type of battery. Replace the battery only with UL listed
Lithium battery that has the same or equivalent type recommended by Kontron.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery according to the local
regulations dealing with the disposal of these special materials (e.g. to the collecting points for the
disposal of batteries).
3.2.
Basic Safety and EMC Compatibility
The PCI-960 board is a fixed component that shall be installed into a stationary system by applying good engineering
practices and respecting the information on the intended use of the components with a view to meeting the protection
requirements [refer to (a) and (b)].
The PCI-960 board was designed and manufactured, having regard to the state of the art, as to ensure that:
(a) the electromagnetic disturbance generated does not exceed the level above which radio and telecommunications
equipment or other equipment cannot operate as intended;
(b) it has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to
operate without unacceptable degradation of its intended use.
The PCI-960 board was designed, manufactured and checked according to the basic safety requirements in the scope of
the low-voltage (LVD) directive.