KONLEN TECHNOLOGY LIMITED
Website: www.konlen.com
U1 building, Oriental Garden, NanShan District, Shenzhen City, Guangdong Province,China
Tel: +86-(0)755-86082432 E-mail:
MSN:
Skype: securitykonlen
- 11 -
for confirmation.
Example: Suppose the present time is 12:13.05 and the date is 08-01-2007, input * + 07010OK.
3.2.9 Set/cancel fixed time arm/disarm
a) Timing arm
Press “SET ” to move cursor, when “SET,
” appears on the LCD display, then Input: N + time (hour/ minute)
+ OK. Two sounds of “di, di” will confirm the operation.
Note: N stands for 1 and 2, two fixed time arm can be set.
Example: Set 16:08 and 22:30 as the auto arm time,
Input 1 + 1608 + OK, and 2 + 2230 +OK. The main unit will be armed automatically at 16:08 and 22:30.
For inquiry, press 1 + check and 2 + check
To cancel it, press N + 9999 + OK in arm mode.
b) Timing disarm
Press “SET” button to move cursor, when “SET,
” appears on the LCD display, then input: N + time
(hour/minute) + OK. Two sounds of “di, di” will confirm the operation
Note: N stands for 3 and 4, two fixed time disarm can be set.
Example: Set 19:25 and 7:30 as the auto disarm time, input 3 + 1925 + OK, and 4 + 0730 + OK. The Main
unit will be disarmed automatically at 19:25 and 7:30
For inquiry, press 3 + check and 4 + check
To cancel it, press N + 9999 + OK in disarm mode.
3.3 Learning code
3.3.1 learn/cancel remote controller.
a) Learn remote control
After passing the verification of administrator password, press “SET” button to move cursor, when “SET,
COM” appears on the LCD display, input: 1 + N + OK, the LCD flashes then trigger the remote controller
immediately. It means successful learning when the LCD background light stops flashing and with voice
reminder “Learning code finished”. It will exit automatically if learning code failure within 10s. Please learn
again.
Note: N stand for 01, 02, 03, 04………16, total 16 remote controllers you can learn.
Example: learn first remote controller, input 101OK on keyboard of main unit.
b) Cancel remote controller.
After passing the verification of administrator password, press “SET” button, when “SET, COM” appears on
the LCD display, input * + N + OK, the LCD will flash three seconds, then stop. The remote controller is
deleted successfully. Note: N stand for 01, 02, 03, 04………16.
3.3.2 Learn/cancel wireless sensors
a) Learn wireless sensors
After passing the verification of administrator password, press “SET” button, when “SET, COM” appears on
the LCD display, input: 2 + N + OK, the LCD flashes then trigger the wireless sensor immediately. It is learnt
successfully when the LCD stops flashing. No success within 10s, it will exist learning status automatically,
please do it again according to above steps.
Note: N stand for 01, 02, 03, 04………40, total 40 wireless sensors you can learn.
Zone 01 to 32 for common wireless sensors, such as wireless PIR sensor, door/window magnetic
contact, glass break sensors etc.
