Konlen KL-H50, Руководство пользователя

Страница: 15 / 19

KONLEN TECHNOLOGY LIMITED
Website: www.konlen.com
U1 building, Oriental Garden, NanShan District, Shenzhen City, Guangdong Province,China
Tel: +86-(0)755-86082432 E-mail: klalarm@konlen.com MSN: konlensales@hotmail.com Skype: securitykonlen
- 15 -
Note: A stand for independent arm zone
Zone01 to 24 can be programmed as independent arm/disarm zones which only SMS can arm/disarm
them, no use by remote controller).
b) Inquiry independent arm zone
By the main unit keypad: After passing the verification of administrator password, press “SET” button to move
cursor, when “SET, TYPE” appears on the LCD screen, press "check". Then main unit send a SMS like above
example to the preset five SMS receiving phone numbers.
By SMS: Send a SMS order like this: Administrator pa AA to main unit, then main unit reply a SMS
about the independent arm/disarm zone information to preset five SMS receiving phone numbers
c) Independent disarm
Send SMS: Administrator pa AD + zone (01, 02...24) to disarm the preset independent arm zones.
5.8 Delay alarm setting
SMS format: 1234 + zone number ( 1 or 2) + D + delay alarm time (00s, 15s, 30s or 45s)
Note: Zone 1 and zone 2 can be set as delay alarm zones.
Suggest users to install the delay alarm zone sensors on the way from door to alarm main unit.
User will have enough time to disarm the alarm system while entering into the house.
Example: Set zone 1 and zone 2 as delay alarm zones, and the delay alarm time is 30s.
Send SMS: 12341D30 and 12342D30 to alarm main unit by two separate SMS.
The alarm system will make “ DI, DI, DI….” sound to remind user to disarm it soon whe n entering into the
house. The system will make alarm immediately in 30s if the system is still not be disarmed.
5.9 Inquire arm/disarm status
Send SMS: 4 digits of administrator pa W1
Reply SMS: The Main unit’s arm/disarm status
5.10 Inquire external power status
Send SMS: 4 digits of administrator pa W2
Reply SMS: The Main unit’s external power status
6. Usage
6.1 Remote controller
a) Delayed Arm: Press “ ” on remote controller or main unit, the main unit is counting down with “di,di…”
sound and red “ ” icon on LCD is flashing. 25 second later, two long “di, di” sound confirm the system enter
into arm status and the “ ” icon stops to flash.
b) Quick arm: Press “ ” on remote controller and then press “ ” immediately, the system is armed quickly.
c) Emergency alarm: Learning code the “ ” as panic button first, press “ ”, the main unit auto-dial the