5
1. DC POWER INPUT
Use only supplied AC/DC power supply.
2. AUDIO OUTPUT
Audio for playback.
3. MAIN POWER SWITCH
Switch ON or OFF the DVR system.
4. VIDEO OUT
Video output signal for another monitor.
5. AUDIO INPUT (1&2)
Audio input for microphone connection. Audio1 IN is audio for CH1 and also hearable if switched
to quad view. Audio2 IN is audio for CH2 and only hearable if CH2 is selected and not if quad
view is chosen.
6. PS2/MOUSE
Connection for mouse (included).
7. HDD POSITION
Position for HDD installing (remove the 4 screws of the grid to access).
8. VIDEO INPUT
Video input for CH1, 2, 3 and 4.
9. RS485 / ALARM / SENSOR
RS485
power line ports. To control high-speed dome camera.
ALARM
input for alarm device
SENSOR
input for 4 motion sensors (PIR) to start recording by motion detection
Description side panel:
USB port for back-up and software update
