14
-
Grey bar
: No record will be made for this time period if user can’t activate manual recording.
-
Red bar
: The time period with a red bar will activate continuous recording mode (Time record)
unless there is any manual stopping during recording during that time.
-
Green bar
: The time period with a green bar for built-in motion recording (MD). (See also the
following chapter “MOTION DETECTION”)
-
Yellow bar
: The time period with yellow bar will activate external sensor recording.
-
Half-yellow and half-green bar
: The time period with half-yellow and half-green bar will
activate the combination of built-in motion (MD) recording and external sensor (Sensor)
recording. (See also the following chapter “SENSOR”)
[Using keypad or remote control button]
Press button
「
Up
」
/
「
Down
」
to move the prompt, then press
「
SEL
」
to adjust video record
method during each time period every day. User can adjust the same record method during some
time periods synchronously, move the prompt first and press [QUAD] button on the DVR front
panel or remote control, then move the prompt to enlarge area(CH1 for upwards
、
CH2 for
downwards
、
CH3 for leftwards
、
CH4 for rightwards), and then press
「
SEL
」
to adjust video
record method.
[Using Mouse button]
While holding a left mouse click button, move the mouse to enlarge area and then single left click
to adjust video record method.
To previous, to save the parameters that user sets up.
ALARM
Using SELECT button or hold a left mouse button to click icon “
◄ / ►, adjust parameters of
each option.
A: [ALARM DURATION]
It sets the alarm duration time (in seconds) after alarm
is activated.
Value at
“05
、
10
、
15
、
20
、
25
、
30
、
CONT
、
OFF”(in
seconds). Default at “OFF”.
By changing the value in the ALARM DURATION, you
can adjust how long the alarm will last in seconds. The
alarm device should be installed.
B: [BUZZER DURATION]
It sets the buzzer duration time (in seconds) after alarm is activated.
Value at “05
、
10
、
15
、
20
、
25
、
30
、
CONT
、
OFF”(in seconds). Default at “OFF”. When “buzzer
duration” is “cont”, the buzzer will work continuously.
C: [EVENT REC DURATION]
It sets the record time of duration (in seconds) after sensor recording or motion recording or MD &
sensor recording is activated.
Value at “05
、
10
、
15
、
20
、
25
、
30”(in second).
