E-10
(40) Fix the working table. (Three supplied screws A
and one supplied screw B)
(41) Connect the control panel cable to the main
body.
Note:
Plug in the straight connector of the control panel
cable.
(42) Route the control panel cable as shown in the
illustration.
(Eight wire saddles and two edge covers)
(43)
<Only when installing the Local Interface Kit EK-
611>
Route the cable for the local interface kit as
shown in the illustration.
(44) Attach the supplied bracket A.
(Four supplied screws C)
(45) Pass the cable through the four wire saddles
and one edge cover.
Screw A
Screw B
