E-17
(6) Attach the scanner right cover. (Three shoulder
screws, one screw, and one cap)
Note:
Run the harness through the hole made in step
(3).
(7) Close the right door of the machine.
(8) Remove the cover for the key counter harness.
(Two screws)
(9) Run the harness through the hole on the working
table as shown in the illustration.
(10) Attach the working table to the machine.
(Four screws removed in step (1))
(11) Remove the cap from the working table (at one
place).
(12) Attach the mounting plate that is included in the
Key Counter Mount Kit to the working table.
(Two screws supplied with the Key Counter
Mount Kit)
Note:
When installing both keyboard and key counter,
place the key counter perpendicular to the
machine.
(13) Attach the socket to the mounting plate. (Two
screws supplied with the Key Counter Mount
Kit)
