E-8
(29) Install the supplied mounting plate.
(Four supplied screws C)
(30) Reinstall the scanner right cover.
(Three supplied shoulder screws)
Note:
When installing the Local Interface Kit EK-611,
remove the knockout shown in the illustration from
the scanner right cover and run the cable thorough
the hole on the cover.
(31) To install the covers and other parts removed in
steps (17) to (21), reverse the removal proce-
dure.
(32) Reinstall the right front cover removed in the
step (8). (Three screws removed in step (8))
Note:
Attach the cover to the same places from which
the cover was removed in step (8) referring to the
guide lines on the plate of the main body
(33) Attach the supplied cover A to the main body at
the position shown in the illustration.
(One screw removed in step (10))
(34) Tighten one screw for the control panel left
cover.
(One of the three screws removed in step (3))
Note:
Tighten only the screw shown in the illustration.
Guide lines
