Konica Minolta PCL-400, Руководство пользователя

Страница: 81 / 357

3-22
After changing the settings for parameters marked with an asterisk (*), turn the ma-
chine off, then on again.
Specifying the NetWare 4.x/5.x/6 remote printer mode settings
1
Log on with Administrator privileges.
2
Start up NWadmin.
3
Select the organization performing the print service or the category container,
and then select “Print service quick setup” from the “Tools” menu.
4
Type in the print server name, printer name, print queue name and volume
name, select “Remote parallel, LTP1” as the printer type, and then save the
specified settings.
– For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation, and
specify settings as necessary.
5
Start up Easy Web Management, click the Network tab in Administrator mode,
select “NetWare Configuration”, and then specify the following settings for the
copier.
– For details on using Easy Web Management, refer to “Using Easy Web
Management” on page 11-1.
6
From the NetWare Server console, load PSERVER.NLM.
7
From the NetWare Server console, display the printer server screen, and check
that the printer name entered in step4 is displayed for Printer0 and that it is list-
ed as “waiting for job”.
Password Retype Specify only when setting from the NetWare Server.
Preferred File Server Not necessary to specify Name of the file server that con-
nects to PServer
Preferred NDS Tree Name of the tree where Pserver
logs on Not necessary to specify
Print Queue Scan Rate* 1 (Change as necessary.)
Mode* Pserver
Printer Number 1 (Change according to the setting.)
Connection Mode Directory Services Bindry
Parameter NDS Bindery
NetWare Configuration* Enable NetWare (Select the check box to enable it.)
Parameter NDS Bindery