E-2
II. Accessory parts
Note:1
Prepare glue pellets (GC-501) on your own.
Note:2
It will take about 20 minutes to melt a pack of glue
pellets.
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take
a good position of not being excessively loaded.
(mass: approx. 210 kg)
[Precaution when transporting the PB-501]
When transporting the PB-501 on a slope where
the pitch changes suddenly (including lifter of a
truck and etc.), make sure to transport it back-
ward or forward. Do not move it in the arrow
marked direction of the following illustration. If
transporting it in the arrow marked direction,
some casters on the book receptacle/2 may be
deformed because the casters on the book
receptacle/2 are too weak to support the weight
of the whole PB-501.
1: Book receptacle/2
2: Book receptacle
3: PB-501(Main unit)
No.
Name
Shape
Q’ty
1. Installation
plate/A
(for RU-503)
A075IXC1018CA
1
2. Installation
plate/B
(for RU-503)
A075IXC1019CA
1
3. Installation
plate/1
A075IXC001SA
1
4. Installation
plate/2
A075IXC002SA
1
NG
A075IXC011SA
1
2
3
5. Installation
plate/3
A075IXC003SA
1
6. Installation
plate/4
A075IXC004SA
1
7. Installation
plate/5
A075IXC005SA
1
8. Paper path guide
(used only when
installing the FD-
501.)
A075IXC006SA
1
9. Ventilation duct
A075IXC007SA
1
10. Magnet
A075IXC008SA
4
11. Filter
A075IXC009SA
1
12. Power cord
A075IXC014SA
1
13. Processing
cover/1
A075IXC012SA
1
14. TP screw
M4x6
10
15. TP screw
M4x10
2
16. Installation
manual
1
17. Weight
*See the service man-
ual for instructions as
to how to use it.
A075IXC013SA
4
18. TP screw M3x8
(used only when install-
ing the weight(s).)
2
No.
Name
Shape
Q’ty
