Konica Minolta FK-101, Руководство по обслуживанию

Страница: 52 / 225

3-12
Parameter
RCV signal detect mode
RCV signal detect time
Pause time
Response waiting time
DC-LOOP check
Busy tone detection
No. of busy tones
1300 Hz detection
Pseudo RBT send level
Pseudo RBT cadence
min.RING OFF time
Number
6[sec]
1[sec]
55[sec]
OFF
ON
2
ON
-10[dBm]
Japan
200[ms]
Yes
Yes
Yes
Yes
Yes
Yes
Number / time
35 to 115[second]
ON / OFF
ON / OFF
ON / OFF
None, Japan, USA, UK and German
100 to 1,000[ms]
Set Value
Reference
0 to 15[second]
(in steps of 1 second)
1 to 7[second]
(in steps of 1 second)
0 to 15[times]
(Zero time equals to no detection.)
-10 to -15[dBm]
(in steps of 1dB)
Factory-shipped
Default Setting
■
Detailed Explanation
RCV signal detect mode
•
Sets to “Time” when ninger can not be detected by the number.
Pause time
•
The pause time for one pause key (pause between digits)
Response waiting time
•
Refer to 3.2.2 T1 TIMER section.
DC-LOOP check
•
Checks the DC loop current before dialing.
•
When the current is zero, an error occurs. (T.80, an error code is not displayed.)
•
You can change the setting to be compliant to standards in other countries. In Japan, set this
parameter to OFF.
Busy tone detection and No. of busy tones
①
①
When the number of tones is set to
three, judged to be busy here.
Toot Toot Toot