Konica Minolta FK-101, Руководство по обслуживанию

Страница: 122 / 225

7-6
*3) Transmission speed appointment (bit 11, 12, 13 and 14)
*4) Minimum scan line time instructon (bit 21, 22 and 23)
Important
(1) Considered to be A4 width when the DIS recording paper width is invalid (1, 1)
Becomes a FIF error when the DCS recording paper width is invalid (1, 1).
(2) Considered to be unlimited when the DIS recording paper length is invalid (1, 1).
Considered to be unlimited when the DCS recording paper length is invalid (1, 1).
The DCS recording paper length in a machine is made to be of the same length as that in
a remote station and is sent.
(3) Considered to be 2400bps when the DIS transmission speed is an undefined value.
Becomes a FIF error when the DCS transmission speed is an undefined value.
(4) Considered to be 40ms instruction when the MSLT of DCS is an undefined value.
(5) Considered to have mm ability when DIS inch ability and mm ability are both set to OFF.
Considered to be 200*100pels/inch when the DCS resolution receives the inch instruction at 3.851/mm.
Becomes a FIF error when more than one of bit41, 42 and 43 are set to on in the resolution of DCS.
(6) Becomes a FIF error when DCS receives the MMR instruction without ECM.
(7) Becomes a FIF error when DCS receives the file transfer (BFT) instruction without ECM.
1 1 2 1 3 1 4 1
0 0 0 0 r e t 7 2 V
V
V
V
V
V
V
V
/ 4 2
0 1 0 0 r e t 7 2 / 8 4
1 0 0 0 9 2 / 6 9
1 1 0 0 9 2 / 2 7
0 0 0 1 7 1 / 4 4 1
0 1 0 1 7 1 / 0 2 1
1 0 0 1 7 1 / 6 9
1 1 0 1 7 1 / 2 7
Contents
1 2 2 2 3 2
0 0 0 s m 0 2
0 0 1 s m 0 4
0 1 0 s m 0 1
1 0 0 s m 5
1 1 1 s m 0
Contents