manualshive.com logo in svg

Konica Minolta FK-101, Руководство по обслуживанию

Поделиться
Скачать
Konica Minolta FK-101 Скачать руководство пользователя страница 153

8-13

8.3.2 Cassette / Paper Selection

The cassette and paper selection is performed by using two parameters of the key operator mode.

“Rx paper selection” ........... Auto, A4 priority, A4 fix, B4 priority, B4 fix, A3 priority, A3 fix ..... a

“Tray selection to Rx” .......... Auto, Tray 1, Tray 2, Tray 3 and Tray 4 ......................................... b

When “b” is fixed to tray 1, 2, 3 or 4, “a” becomes invalid.

Only when “b” is set to Auto, “a” becomes valid.

Bypass cannot be specified as fix-tray.

Page dividing function becomes invalid when the tray is fixed.

8.3.3

Forced Memory Reception

The function to enable to print out by operations without printing out documents at reception in the

FAX communications.

Related settings

1) Forced memory reception function

•

Set in the key operator-Special setting.

•

When this setting is set to OFF, display and actions related to the forced memory reception

are not performed. In addition, you can not perform operations. If this setting is not set, the

following forced memory reception function used is also set to disabled.

2) Forced memory reception function use

•

Set in the key operator setting.

•

When this setting is set to disabled, the forced memory reception actions are not performed

at reception. In addition, you can not display, erase and print the forced memory reception

documents. The forced memory reception documents are displayed on the main menu irrelevant

to this setting.

3) Forced memory reception password

•

Four digits (four-digit number, default 0000)

•

Set in the key operator setting.

•

This setting is required to display, delete or print the forced memory reception documents.

Operation

Necessary conditions for this function

•

When there is the forced memory reception function, and it is used, the forced memory reception

action is performed.

Line seizure

•

It is possible to receive up to 100 forced memory reception jobs including the normal reception

and the substitute reception. When 100 forced memory reception jobs are received, machine

will not catch the line. (Except the case that the polled transmission documents and bulletin

board documents are registered.)

Содержание FK-101


































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды