Konica Minolta CA-410 Series, Инструкция по эксплуатации

Страница: 16 / 140

14
Probes
4. Optional Accessories
„ z
Conversion Cable IF-A29
Connects a probe to a PC or PLC (sequencer) via RS-232C and inputs
synchronization signals to the probe.
How to connect: Refer to page 22.
„ z BNC Conversion Cable IF-A35
Inputs synchronization signals to the probe.
How to connect: Refer to page 22.
5. Description of Each Part of Probes
(1)
(2)
(5)
(3)
(2)
(3)
(4) (4) (4) (4)
ISO screw Tripod mount screw ISO screw Tripod mount screw
„ z
Probe other than mini
„ z
Mini probe
Note: CA-P427, P427H, P410, and P410H have another tripod mount screw
on the front side of the ISO screw. For details, refer to the dimensions. Note: Mini probes have screws for jigs and
cable clamps. For details, refer to the
dimensions.
(1) Receptor
Make this part face perpendicular to a display to perform measurement.
(2) USB connector
For USB connection with a data processor or a PC, connect the USB cable IF-A28 supplied as a standard accessory.
(3) RS-232C connector
For RS-232C connection to a data processor, connect the mini DIN cable IF-A30/31/32 for the data processor to the
RS-232C connector.
For RS-232C connection with a PLC or PC, connect an optional conversion cable IF-A29.
Use a conversion cable IF-A29 or a BNC conversion cable IF-A35 to input the display's vertical synchronization signals, which
are used for measurement in “EXT” measurement synchronization mode.