Konica Minolta CA-410 Series, Инструкция по эксплуатации

Страница: 128 / 140

126
Ethernet Connection
2. Setting the DHCP
This instrument allows users to turn communication ON/OFF to enable Ethernet connection to a PC and to set the
properties (IP address, subnet mask, and default gateway).
* Factory setting: OFF
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[System], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
min
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
3
Press the [UP] or [DOWN] key to select
[DHCP], and then press the [ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
min
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
4
To enable communication, press the [UP]
or [DOWN] key and select [ON]. Press the
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
◉ ON
○ OFF
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
5
Press the [UP] or [DOWN] key to set the
desired value.
Holding down the key changes the value
continuously.
6
Press the [RIGHT] key to move the cursor
to the next item.
Pressing the [LEFT] key moves the cursor to the
previous item.