Konica Minolta 7915 Скачать руководство пользователя

Страница: 254 / 284

Touch Panel Messages

10-44

Konica 7915/7920

10.9

Other Messages

Message

Cause

Remedy

Malfunction detected.
Call your Technical Rep. and
provide code:

The copier malfunctioned
and is unable to make cop-
ies.

Inform your technical repre-
sentative of the code dis-
played on the touch panel.

Please input your 4-digit Ac-
cess# and press the Access
key.

Access codes have been
specified. Copies cannot be
made unless a specified ac-
cess code is entered.

Enter your access code.
p. 3-28

Replenish paper.

The indicated drawer has ran
out of paper.

Load paper into the indicated
drawer. p. 10-1

Please add Toner.
Open the Toner Supply Door
and follow the Operator’s
Manual.

Since the toner for the indi-
cated color has run out, the
copier is unable to make cop-
ies.

Refill the toner. p. 10-6

Please add XXXX Toner.

The toner for the indicated
color is about to run out.

Refill the toner. p. 10-6

Please install the correct Im-
aging.
Unit correctly, and close all
doors.

The indicated imaging unit is
not installed correctly.

Correctly install the imaging
unit. Otherwise, contact your
technical representative.

Please insert the Image
Transfer Belt Unit and close
all doors.

The image transfer belt unit
is not installed correctly.

Contact your technical repre-
sentative.

Please insert Waste Toner
Bottle
and close all doors.

The waste toner bottle is not
installed correctly.

Correctly install the waste
toner bottle. Otherwise, con-
tact your technical repre-
sentative.

Please insert the Fusing Unit
and Fusing Web Unit and Oil
Roller Unit and close all
doors.

The fusing unit, fusing web
unit, and oil-roller unit are not
installed correctly.

Correctly install the fusing
unit, fusing web unit, and oil-
roller unit. Otherwise, con-
tact your technical repre-
sentative.

➜

Section properly.

Since a copier door or cover
is open or an option is not in-
stalled correctly, the copier is
unable to make copies.

Make sure that all doors and
covers are closed and that all
options are installed correct-
ly.

Replace Staple Cartridge X.

The staples have run out.

Replace the staple cartridge.
p. 10-11

Misfeed detected.
Remove misfeed at O.

Since a paper misfeed oc-
curred, the copier is unable
to make copies.

Clear the paper misfeed.
p. 10-16

The Exit Tray has reached its
capacity. Please remove all
pages from -> section tray.

Since the maximum amount
of copies for the indicated fin-
isher tray has been exceed-
ed, the copier is unable to
make copies.

Remove all copies from the
indicated tray.

Содержание 7915





























































































































































































































































































Результаты поиска

Содержание 7915

Отзывы:

Похожие инструкции для 7915

Бренды по названию

Популярные бренды

Konica Minolta 7915, Инструкция по эксплуатации

Результаты поиска

Содержание 7915

Отзывы:

Похожие инструкции для 7915

Бренды по названию

Популярные бренды