Kongsberg Simrad Mk3, Руководство по установке

Страница: 5 / 38

110-0001063/A
5
About this manual
The purpose of this publication is to provide the descriptions and procedures required to
install the Mk3 Operating Panel.
Target audience
The publication is intended for technical personnel such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand
the general principles of maritime electronic equipment. You must also be familiar with
the installation of electronic and mechanical products. You are expected to have basic
mechanical skills and familiarity with handling of sensitive electronic equipment.
Installation instructions/Installation drawings
The information in this document must be regarded as guidelines and recommendations.
Note
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, all documents provided by the shipyard for the physical installation of the
sonar system must be approved by the vessel’s national registry and corresponding
maritime authority and/or classification society. Such approval must be obtained before
the installation can begin. The shipowner and shipyard doing the installation are
responsible for obtaining and paying for such approval.
Kongsberg Maritime AS will accept no responsibility for any damage or injury to the
product, vessel or personnel caused by equipment that has been incorrectly installed or
maintained, or by drawings, instructions or procedures that have not been prepared by us.
The outline dimensions of the sonar receiver found in the relevant chapter in this manual.
End user manuals and source drawings (normally in AutoCad format) can be downloaded
from our website.
• https://www.kongsberg.com/fisherysonar
Registered trademarks
Observe the registered trademarks that apply.
About this manual