Kongsberg Simrad Mk3, Руководство по установке

Страница: 28 / 38

28
110-0001063/A
The sonar system supports several different operating
panels.
The Mk3 Operating Panel is connected to the Processor
Unit with a USB cable. A dedicated power supply unit
is not required.
Tip
The HT20470 Processor Unit allows you to enable "wake-up on USB" functionality.
"Wake-up on USB" means that you can turn on the sonar system by activating any USB
device connected to a compatible USB port.
To select which operating panel to use, open the
Operating Panel
page in the
Installation
dialog box. The
Installation
dialog box is located on the
Setup
menu.
Tip
When you work in the
Installation
dialog box, you must always select
Apply
to save the
changes made on a page. You must do this before you continue working on a different
page.
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens. This dialog box contains a number
of pages selected from the menu on the left side.
3 On the left side of the
Installation
dialog box, select
Operating Panel
.
4 Select which operating panel to use.
5 At the bottom of the page, select
Apply
to save your settings.
6 Continue your work in the
Installation
dialog box, or select
OK
to close it.
Simrad Installation Manual