KONG Italy EXPRESS DYNEEMA, Руководство пользователя

Страница: 24 / 80

the product. Validity corresponds to the legal guarantee
of the country in which the product was sold (max 3
years) and shall be effective from the selling date by
the Manufacturer. No claims may be lodged against the
Manufacturer after such term has elapsed. Any request
of reparation must be accompanied by documentary
evidence of the date of purchase. If the defect is
recognized, the Manufacturer, at its only discretion, will
repair or replace or refund the product. In no case the
Manufacturer’s liability will exceed to the invoiced price.
7 – SPECIFIC INFORMATIONS
The Personal Protective Equipment class III, SLING (fig.
1), it’s a sling for quickdraws conform to the norm EN
566:2006, suited for sport climbing.
Caution, beware of death:
- these devices are not energy absorbers, the use on
via ferrata is forbidden!
- the anchor point must be always above user’s head
(fig. 2).
Fig. 3 – Quickdraws composition example; the use of a
rope retainer called “fast” help to keep the connector in
the right position inside the sling.
Correct use of “fast”:
- made of stainless steel (fig. 4),
- made of plastic (fig. 5),
- made of rubber (fig. 6),
- made with a stainless steel bar (fig. 7).
Examples of incorrect and dangerous use of “fast” (fig.
8), caution: beware of death!
Fig. 9 – Correct insertion of the progression rope inside
the connector.
Fig. 10 – Incorrect and dangerous insertion of the
progression rope inside the connector;
Warning:
a fall
could result in the accidental release of the rope.
Fig. 11 - The use of a quickdraw facilitates the
sliding of the rope and helps to reduce the fall factor.
Fig. 12 - Example of correct placement and use.
Fig. 13 - Examples of incorrect and dangerous placement
and use.
8 – PRE AND POST USE CONTROLS
Check and make sure that the product doesn’t show:
- Cuts, wear or damages caused by use, sources of
heat, chemical reagents, sharp edges etc, check in
particular the parts near the connectors,
- Broken seams: attention to cut or loose wires.
Remaining in a safe position, perform a leak test of the
device by uploading your weight, every time you use it.
9 – CERTIFICATION
This product has been certified by the notified register
organisation under n. 0123 - TÜV SÜD Product Service
GmbH Daimlerstraße 11 - 85748 Garching
Master text: ITALIAN