KONG Italy EXPRESS DYNEEMA, Руководство пользователя

Страница: 22 / 80

Your life depends on the constant efficiency of your
equipment (we would earnestly recommend equipment
for personal use only) and its history (use, storage, con-
trols, etc.).
D) This product can be used combined with personal
protective equipment conforming to Directive 89/686/
EEC when compatible with the relevant information of
the product. When you intend to combine two (or more)
products read carefully the information.
E) The anchor position is essential for a safety fall
arrest: carefully assess the free height under the user
(clearance), height of a potential fall, rope paid out
and the “pendulum” effect in order to avoid all possible
obstacles (e.g. ground, material rubbing against the rock
face, etc..).
F) Resistance of anchors point, either natural or fixed
into the rock, is not always granted and therefore it is
essential for the user to carefully judge the situation
beforehand to guarantee adequate protection.
G) It is strictly forbidden to modify and/or repair the
product: The Manufacturer shall not be held liable for
any damages, injuries or death caused by: improper use,
product modifications, repairs by unauthorized persons
or use of non-original spare parts
H) During transportation avoid exposure to U.V.
radiations and sources of heat and avoid contact with
chemical reagents or other corrosive substances, and
adequately protect any pointed or sharp parts. Warning:
never leave your equipment in a car under the sun!
I) For the sake of your own safety, it is essential to make
sure that the product was sold to the public: complete, in
their original packaging and with the relative information.
It is compulsory for dealers selling products in countries
other than the original destination to check and supply
the translation of this information.
L) This product has been tested and inspected piece by
piece in conformity with the Quality System certified to
the UNI EN ISO 9001 international standard. Personal
protective equipment is certified by the notified body
indicated in the relevant product instructions.
Warning:
laboratory tests, inspections, information and norms
do not always manage to reproduce what actually
happens in practice so that the performances under
real conditions when using the product in a natural
environment can often differ considerably. The best
information can be gained by continual practice
under the supervision of skilled and qualified
instructors.
2 – MAINTENANCE AND STORAGE
Product maintenance consists of:
- cleaning : frequently wash the product with lukewarm
(max. 40°C) drinking-water where necessary, you can
also add some gentle detergent. Rinse and leave to
dry naturally away from direct sources of heat, do not
centrifuge.
- disinfection (if necessary): soak the product for an hour