Konami RACING JAM Скачать руководство пользователя страница 2

Страница: 2 / 71

Thank you for purchasing this Konami product. This manual explains how to operate your
game machine correctly and safely.

About this product

•Failure to operate the machine correctly could result in malfunction or

accidents, so please read this manual carefully before commencing
operation. Be sure to operate the machine as described in this manual.

•Keep this manual carefully so as to be ready for use when necessary.
•If the machine still fails to display or to get started, immediately turn OFF

the main power switch and contact your nearest dealer.

•The specifications of this product are subject to change without notice for

reasons such as improving the performance.

•The contents of this game, its main data and design are protected by copyright

law and industrial property law.

•Unauthorized reproduction of this document or any of its contents is strictly

forbidden.

•This manual covers the following models:

•GM676-TB •GM676-HD

The specifications of GM676-TB may be somewhat different from GM676-HD. In such a case,

read the descriptions of the model which applies to the game machine you are operating.

Driver software used under license of 3Dfx interactive.

Содержание RACING JAM








































































Результаты поиска

Содержание RACING JAM

Отзывы:

Похожие инструкции для RACING JAM

Бренды по названию

Популярные бренды

Konami RACING JAM, Руководство оператора

Результаты поиска

Содержание RACING JAM

Отзывы:

Похожие инструкции для RACING JAM

Бренды по названию

Популярные бренды