Konami RACING JAM, Руководство оператора

Страница: 53 / 71

51
Adjust so that (-) mark on the potentiometer knob is
aligned with the center terminal.
How to adjust the steering wheel unit potentiometer
1
Fit the potentiometer projection to the
smallest hole of the potentiometer
bracket. Tighten up the hexagon
nut.
2
Connect the wiring poperly.
5
Assemble the steering wheel unit to the main unit in the reverse order.
3
Grasp the potentiometer tip with
your fingers and adjust it as shown
in the figure.
4
Turn the steering wheel to the
o r i g i n a l p o s i t i o n , i n s t a l l t h e
potentiometer bracket as it was and
tighten the bracket with the two
fixing screws securely.
•Even when the potentiometer bracket screw and the lock screws are tight enough,
the potentiometer bracket has some play. Keep in mind that the bracket is not
tightly locked.
6
Carry out “5-2 PCB start-up check (self test)” on page 27.
MEMO
7 Maintenance and annex
7
Call up the “I/O CHECK” screen, show on page 30. Move the steering wheel
and make sure the “I” make comes to the LEFT and RIGHT positions.
Spring washer Flat washer
Potentiometer bracket
Potentiometer
Red
Green
Black
Projection Hole
Hexagon nut