Konami RACING JAM, Руководство оператора

Страница: 60 / 71

58
Wiring
Motor
Motor brushes
Motor
Screw caps
7-6 Inspecting and replacing the motor brushes
•Before inspecting and replacing the motor brushes, be sure to turn OFF
the main power switch and unplug the power cord from the receptacle.
At the motor of the steering wheel unit are fitted two motor brushes. The motor
brushes are worn every time when the machine is operated. It is therefore
recommended to do periodical checking about every 2000 hours.
1
Referring to page 49, separate the
control panel from the main unit.
2
Disconnect the wiring from the
motor.
•Check to see if the motor brush has worn
out up to the marked line. If so, replace
the motor brush with new one.
Motor brush part No.
0000036164
7 Maintenance and annex
How to inspect and replace the motor brushes
4
Install the motor brushes back into
position. Attach the control panel
in place.
MEMO
3
Using a Flatblade screwdriver,
remove the screw caps and take
out the motor brushes.