Komfovent VERSO-P, Инструкция по установке и обслуживанию

Страница: 35 / 50

UAB AMALVA we reserve the right to make changes without prior notice
35
V2-C5-15-03-v1
6. OPERATION MANUAL
6.1. Unit control
Air handling units control system ensures control of the physical processes that are taking place inside the air
handling unit.
Control system consists of:
• main controller module;
• several extension modules;
• circuit breakers and main switch;
• control console, which may be installed in a place convenient for the user;
• air dampers actuators;
• temperature sensors.
The control panel (Picture 6.1) is designed for the remote control of the air handling unit, setting of the controller
parameters and their indication. Control panel LCD display allows monitoring various parameters and text mes-
sages. The light diode of the panel indicates the operation mode and fault of the unit. Air temperature, ventilation
intensity, operation modes and other parameters are set by the touch sensitive buttons.
Control panel
6.1 Picture
Touch sensitive buttons located on the panel mean:
on / off and return to previous menu window;
entry to parameters change menu / set parameters confirmation;
navigation in the menu / parameters value change.
6.2. Start-up of the unit
The unit is started up (shut down) by pressing and holding down for 4 seconds the on/off button After switching
on, unit will start operating after short delay about 45 seconds), until air dampers open up, and fans start running.
The operation of the unit is indicated on the display of the panel and by a light diode signal.
Do not switch on the unit without connected earthing! Make sure, whether
all unit sections are tightly interconnected.
6.3. Control panel indication
Information is presented to the user on the LCD display of the panel as well as by means of luminous signals of
the light diode.