Komfovent VERSO-P, Инструкция по установке и обслуживанию

Страница: 11 / 50

UAB AMALVA we reserve the right to make changes without prior notice
11
V2-C5-15-03-v1
1. Plate heat exchanger
2. Support frame
3. Frame
4. Bottom shields
5. Place of sections connection
6. Bypass damper with actuator
7. Drop eliminator (if needed)
8. Condensate bath with drainage
Plate heat exchanger can be easily removed for inspection.
6
5
4 1
8
7
2
3
Removing plate heat exchanger from VERSO -P/PCF air ha ndling units.
Demounting of the section.
9
1 8 7 4
4
5
6
2
3
1. Screws are unscrew; bottom shields are removed
2. Plastic axle-pin
3. Screw
4. Frame bolts are removed; the frame is removed
5. Frame
6. Frame bolts
7. Plate heat exchanger is removed
8. Condensate diversion mechanism is removed
9. Bolts connecting the sections are removed
Cleaning and Inspection of Plate Heat Exchanger
Always clean against the regular direction of airflow.
Inspection and dedusting of the plate heat exchanger is performed once per year (it is removed from the unit
and blown with an air blast or washed with tepid water).
Inspect the condensate drain to make sure that it isn’t clogged.