Komatsu 830E Скачать руководство пользователя страница 184

Страница: 184 / 783

E2-28

Electrical Propulsion Components

2/02 E02016

9. Note in Figure 2-7 the four columns headed by

“OLDCFG”, “OLDOEMCFG”, “NEWOEMCFG”

and “NEWCFG.” These are described as follows:

•

Files listed under “OLDCFG” are the old truck
configuration files created by the mine using the

previous software release which is displayed for

possible conversion.

•

Files listed under “OLDOEMCFG” are the old
OEM files created by Komatsu and given to the

mine to create the previous release configura-

tion files.

•

Files listed under “NEWOEMCFG” are the new
OEM files created by Komatsu and given to the

mine for the current software release version to

create the new configuration files.

•

Files listed under “NEWCFG” are the names of
the new configuration files to be created by the

Configuration Conversion Tool. The cursor is

there, blinking in front of the first file name in the

last column to indicate that the computer is

ready to edit these file names. The numbers

which precede each column heading indicate

the number of different files listed.

10. Note equal (=) signs appear at the beginning and

the end of the first file name line, and follows the

cursor up and down the list of files.

11. Using the RIGHT arrow key, move the cursor to

the right. The cursor will fall under the first letter of

the first file name in the last column. The UP,

DOWN and LEFT arrow keys are now ineffective.

12. Type in the name for the new file over the old

name. There is room for eight characters. If there

are more letters in the old name than in the new,

simply erase them using the space bar.

If an error is made in naming this file, the operation can

be cancelled any time before [ENTER] is pressed by

first pressing [ESC]. This returns the cursor to its origi-

nal starting position where it can once again be moved

with the arrow keys. A note to this effect is displayed at

the bottom of the screen.

Note the asterisk (*) which appears in front of the new

name, and another asterisk appears in front of the col-

umn heading when you begin typing. This means the

file name is being changed, but the file has not yet

been created. The asterisks disappear if [ESC] is

pressed to cancel the renaming operation.

13. After the new name has been typed in, press

[ENTER]. This records the new file name. Note

the cursor moves back to its starting position at

the left of the file name asterisk.

This operation can be cancelled, even after [ENTER]

has been pressed by pressing [F6]. This resets the file

back to its original name.

14. Press [F4] to create the new file. The mine data

from the file in the first column is copied and put

into the OEM file in the third column to create the

name you entered in the fourth column. Note that

both asterisks (*) have changed to plus signs (+),

indicating the file has been created and copied to

the hard disk.

Use the DOWN arrow to move the cursor to the next

file name. Note the equal (=) signs move with the cur-

sor.

15. Use the RIGHT arrow key and move the cursor to

the right.

16. Type in the new file name.
17. Press [ENTER]. The example in Figure 2-9 shows

the new file name to be “TEST2.”

FIGURE 2-7. CONFIGURATION CONVERSION SCREEN

Содержание 830E
















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 830E

Отзывы:

Бренды по названию

Популярные бренды

Komatsu 830E, Руководство по ремонту

Результаты поиска

Содержание 830E

Отзывы:

Бренды по названию

Популярные бренды