Kolpa Kolpa-san Series, Инструкция по установке и эксплуатации

Страница: 36 / 98

Bathtub masage systems page 35
ENGLISH www.kolpasan.eu
Maintnence of the bathtub, when not in use for a longer period of time:
If you don’t intend to use your pool for a longer period of time, you must do the following:

unplug the pool from the electric supply;

drain water from the entire pool

dismantle the filter, wash it well, and dry it thoroughly;

wash the acrylic surface with the Kolpa san cleaning agent and clean water;

rinse massage jets and massage pipes with clean water;

leave the pool for a while in order for the surface to dry out well, all water should drain
out of the system;
ATTENTION!
When you start up the massage pool again, pour water and disinfect the massage pool
with the Kolpa san liquid
– massage pool disinfectant.
Read the instructions on the use of the quantity of agent and the period of disinfection
(packaging label).
Maintenence:
In case any kind of fault appears during pool operation, which is not described in the
Kolpa d.d. company instructions, please call our service team, which will immediately
analyse the fault and react to the problem in a proper way.
Especially in winter time, when temperatures fall below 7

C, regular check-up of the
system operation is of crucial importance.
Massage pool has installed electronics, which signalizes temperature lower than 15

C
and automatically turns on all pumps as well as compressor in order to prevent water from
freezing in the system by mixing water in the installation.
WARNING: System automaticaly activates massage pumps when there is NO WATER IN
THE POOL. For that reason, when the pool is empty
– has no water inside, the MAIN
SWITCH (master electrical switch) must be TURNED OFF.