Bathtub masage systems
page 22
ENGLISH
www.kolpasan.eu
MASSAGE SYSTEM I.- WATER PNEUMATIC
MASSAGE SYSTEM III.- WATER PNEUMATIC
The system includes::
Pneumatic switch (Picture 2)
Water jets
Air regulator
Water temperature between 34°C and 40°C for 20 to 10 minutes is most suitable
for a pleasant massage.
Before using the massage system, fill the bathtub with water, which should not be
hotter than 50 °C and it should be at least 6 to 8 cm above the top jet, as shown on
Picture
1
.
Pressing the water massage button starts the water pump. Pressing the button
again, turns it off.
Never turn on the system if the water level does not correspond with the
instructions. The central part in each water jet can be regulated by 30° from the
central position - Picture
3
.
The air regulator enables air to come into the enclosed water jet system, which
turns into bubbles at the mouth of the jet and increases the massaging effect. This
is regulated by turning the regulator right/left as shown on Picture 4.
Air regulator
Pneumatic switch
Suction jet
Water jet
MASSAGE SYSTEM I
Water jet
MASSAGE
SYSTEM III
Содержание Kolpa-san Series
