Bathtub masage systems
page 9
ENGLISH
www.kolpasan.eu
No airing grille is required for tubs that feature cladding. Just
leave a 5mm slot at the lower edge of the cladding. This SLOT
SHALL NOT BE filled with silicone or some any seal. If this slot
is sealed on a whirlpool, it is OBLIGATORY to install an airing
grille close to the motor.
CAUTION: Be careful when removing cladding to avoid
damaging lining, beams and bolts. Figure 11 shows the
cladding fitting system.
Figure
11
REPAIR OF SURFACE DEFECTS
By using inappropriate cleaners (e.g. containing rough fillers) or when the surface is
damaged by a sharp object or smouldering cigarette, surface defects may occur.
Follow the procedure below to repair:
Use wet sand paper to grind the damaged spot as long as necessary to make the
defect no longer visible. Start grinding by using a grained paper such as grain size
320, 400 or 600, and finish by using the grain size 800.
After grinding is completed, use car polish of other liquid polishing agents for soft
metals to polish the surfaces. Use polishing cotton or soft cloth for that purpose.
WARNING!
Prevent grinding through acrylic layer. For larger scratches we recommend pouring the
special Kolpa san repair kit for acrylic surfaces before grinding and polishing.
MAKE SURE not to damage the surface of massage elements such as controls,
keyboard, nozzles, and similar.
IMPORTANT
Inspect the product or components and their contents prior to installation. Observe
this manual for cleaning and maintenance of the product.
The manufacturer is liable for no additional costs for repair of damage that could be
established, repaired or prevented in advance if the buyer had inspect the product
visually, drained water from the piping (approximately 50L for removing mechanical
particles from the pipes) and tested the operation of functions of the appliance
(clogged pipes, nozzles, splinters or damaged parts, leaking pipes) before the final
installation.
FOR THE ERRORS THAT OCCUR DUE TO IMPROPER INSTALLATION, USE OR
CLEANING AND MAINTENANCE OF THE PRODUCT, THE MANUFACTURER
ACCEPTS NO CLAIMS.
Содержание Kolpa-san Series
