Kollector KOL-4000, Руководство по эксплуатации

Страница: 24 / 82

Watch Mode
When the checkmark on the
Watch Mode
is turned on, the system will not
record any images and will perform only the surveillance functions. Turn the
checkmark off on the
Watch Mode to select motion detection range, movement
sensitivity, recording time and image quality.
*Note
However, if any motion is detected by the sensor connected to a camera under
Sensor Enable mode, the system instantly starts recording and simultaneously
displays the images from sensor-detected camera.
Motion Detection Range
Motion detection range can be selected on the Motion Detection Range screen
after the checkmark on the
All Ranges
selection is turned off.
To inspect and record the images from specific
range of motion, turn the checkmark off on
All
Ranges
selection. Then, select the desired
range of motion to be inspected and recorded
on the
Motion Detection Range
screen.
When the selection is made, any movements in
the selected range will be recorded.
All Ranges
When All Ranges is selected, any motion detected in the entire screen is
recorded. The All Ranges is set as the default.
Image Quality
The quality of the images can be adjusted by using the slide selection bar.