manualshive.com logo in svg

Kollector KOL-4000, Руководство по эксплуатации

Поделиться
Скачать
Kollector KOL-4000 Скачать руководство пользователя страница 7

Introduction 

 

How to Use this Manual 

This manual was designed to provide the best overall instructions for the installation and 
operation of this product. The graphics and terminology used in this manual have been 
carefully selected to enable a clear and distinct understanding of Kollector and its 
components. This manual has been formatted to present distinct methods of installation for 
experienced and novice installers. 
 

Unpacking and Inspection 

All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s 
responsibility to provide suitable delivery. Inspect the cartons upon delivery and, if damage 
is present, make detailed notes on the carrier’s bill. Then, obtain the carrier agent’s 
signature and file a damage claim as soon as possible. 
 
Open the cartons and inspect the equipment for damage. Save the cartons and packing 
material. If damage is present, contact the carrier and file a damage claim immediately. If 
the equipment must be returned to Vicon for repair, follow the instructions in the Shipping 
Information section of this manual. 
 
Kollector complies with FCC Class A computing device requirements and complies with 
European Community EMC Directive 89/336. The product was subjected to the testing 
outlined in European Normalization Standard EN 50081-1 (Electromagnetic Compatibility-
General Emissions Standard Part 1: Residential, Commercial and Light Industry), and EN 
50082-1 (Electromagnetic Compatibility-General Immunity Standard Part 1: Residential, 
Commercial, and Light Industry). 
 
Vicon strongly recommends the use of line conditioners, voltage regulators for all systems 
and components. 

NOTE: Read all instructions before beginning any installation. 

 

NOTE: The following instructions are “typical”. It may be necessary to deviate from them for 

any particular installation.

Содержание KOL-4000



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды