Kollector KOL-4000, Руководство по эксплуатации

Страница: 5 / 82

7. Water and Moisture - Do not use this video product in any location where it may be
exposed to water or moisture. This does not apply to outdoor camera housings, outdoor
pan-and-tilt drives, and other equipment designed for direct exposure to outdoor
environments.
8. Accessories - Do not place this video product on any unstable surface or table. The
video product may fall, causing serious injury to a person and serious damage to the video
product. Use only with a mounting accessory recommended by Vicon, or sold with the video
product. Any mounting of the video product should follow Vicon’s instructions, and a
mounting accessory recommended by Vicon should be used.
9. Ventilation - If slots and openings are provided in the cabinet, they are to provide
ventilation, ensure reliable operation and protect it from overheating. The openings should
never be blocked by placing the video product on a rug or other similar surface. This video
product should never be placed near or over a radiator or heat register. This video product
should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or Vicon’s instructions have been adhered to.
10. Power Sources - This video product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supplied to
your installation site, consult your Vicon dealer or local power company. For video products
intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding - This applies to video products equipped with a 3-wire grounding-type plug,
a plug having a third (grounding) pin. This plug only fits into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
12. Power-Cord Protection - Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from the
video product.
13. Outdoor Cable Grounding - If an outside cable system is connected to the video
product, be sure the cable system is grounded so as to provide some protection against
voltage surges and built-up static charges. Section 810 of the National Electrical Code,
ANSI/NFPA 70-1984, provides information with respect to proper grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
14. Lightning - For added protection for this video product when it is not used for long
periods of time, disconnect it from its power source and from the cable system. This
prevents damage to the video product due to lightning and power-line surges.