www.kolidainstrument.com
149
cleared.
1) DIST: Distance measurement.
2) D/C: Select measurement mode (distance, coordinate)
3) 0set: Set horizontal angle to 0
4) H. ANG: Set known horizontal angle
5) L/R: Select horizontal angle Left/ right
6) REP: Repetition Measurement
7) HOLD: Lock horizontal angle/ Unlock horizontal angle
8) ZA/% : Switch between zenith angle/ slope in %
9) HT: Set the instrument height and target height
10
）
REC: Data recording
11
）
REM: REM measurement
12
）
MLM: Missing line measurement
13
）
RCL: Display the latest measurement data
14
）
View: Display data of the selected JOB
15) EDM: Distance measurement parameter seeting (atmosphere correction, prism constant,
Fine/track)
16
）
CRD.: Coordinates measurement
17
）
S-O: Setting-out measurement
18
）
OFFSET: Offset measurement
19
）
MENU: To Menu Mode
20
）
RESE: Resection measurement
21
）
DOUT: Output measurement results to external instrument
22
）
F/M: Switch between meters/feet
23
）
AREA: Area calculation
24
）
ROAD: Road measurement
25
）
PROJ: Point Projection
26
）
LINE: Straght line setout
·
The following are the default settings of soft key allocations.
Page 1: DIST, D/C, 0SET, HSET
Page 2: L/R, REP, HOLD, ZA%
Page 3: MLM, RESE, MENU, HT
22.1.1 Allocating functions
·
It is possible to freely allocate up to 12 kinds of functions to the soft keys. The allocated key is
saved until it is revised again, even when the power is cut off.
It is possible to allocate the same keys on each page (example 1). The same function can be
