Kohler Rada 215 Series, Руководство по эксплуатации продукта

Страница: 2 / 32

2
1057616-W2-J
INTRODUCTION
Thank you for purchasing a quality Rada
product. To enjoy the full potential of your new
product, please take time to read this guide
thoroughly, having done so, keep it handy for
future reference.
This manual covers all Rada 215 and 222
thermostatic mixing valves manufactured from May
2008. A range of ½” and ¾” mixing valves suitable
for a wide diversity of applications and installations
providing water at safe, accurate temperatures for
ablutionary or process requirements.
Model Range References:
c
all chrome finish
b built-into wall recess or panel, temperature
control protrudes through concealing plate.
d duct or fully concealed mounting, no user
access required.
k locked temperature control, requires hexagonal
key to adjust.
oem concealed model, duct/box installation
The suffix ‘3’ indicates that the thermostatic
mixer has been certified for use in UK Healthcare
premises as a Type 3 valve under the BUILDCERT
TMV3 scheme. For Healthcare Installations refer
to the TMV Requirements Manual. The approved
designations for Type 3 Valves are as follows:
If you experience any difficulty with the installation or operation of your new thermostatic mixer, please
refer to ‘Fault Diagnosis’ , before contacting Kohler Mira Ltd. Our contact details can be found on
the back cover of this guide.
Patent Applications
Euro: 03254070.0
USA: US-2006-0124758-A1,
US-2007-0221740-A1
Design Registration
000578463-003,006
Models Designation
215-t3 c, 215-t3 bc,
215-t3 dk, 215-t3 oem,
215-t3 zc
HP-S, LP-S, HP-W,
LP-W, HP-T44
222-t3 HP-T44, LP-T44
These products also comply with the Water
Supply (water fittings) Regulations 1999.
Patents and Design Registration
Patents
GB: 2 291 693, 2 340 210, 2 392 225,
2 421 297
France: 0 694 721(E)
Germany: 695 13 455.8
USA: 7 240 850
Euro: 1 672 257 DE, FR, GB, IT, NL, SE
GENERAL
1. Make sure that the product is installed and
maintained by a competent installer.
2. Make sure that they are installed,
commissioned, operated and maintained in
accordance with the recommendations in this
guide.
3. The installation must comply with all current
regulations and practices specified by the local
water supply regulations and building codes.
4. The function of a thermostatic mixing valve
is to deliver water consistantly at a safe
temperature. Provided that the thermostatic
mixing valve is installed, commissioned and
operated within the specification limits and
maintained regularly according to this guide,
the risk oif malfunction, if not eliminated, is
considerably reduced.
5. Follow all warnings, cautions and instructions
contained in this guide.
6.
For Type 2 and 3 installations, TMV valves are
only to be used for applications covered by
their approved designations, refer to the TMV
2 and TMV 3 Requirements Manuals
SAFETY
1. The use of the word ‘failsafe’ to describe the
function of a thermostatic mixing valve is both
incorrect and misleading. In keeping with every
other mechanism it cannot be considered as
being functionally infallible.
2. Malfunction of thermostatic mixing valves is
almost always progressive in nature and will
be detected by the use of proper temperature
checking and maintenance routines.