Kohler PW1000 1 kVA, Руководство пользователя

Страница: 14 / 49

2: General Description
8
TS_600_00 PW1000 1-3kVA User Manual 6/4/17
2.3.2 Operator keypad
2.3.3 LCD Display
The LCD display contains a row of warning symbols, a mimic diagram which indicates the power path through the UPS, a
battery status indicator and a multi-function 3-digit numerical display which can be selected to indicate a range of
operating parameters. Each of these areas are described below.
Figure 2.6 LCD Display
ON Button
This button is used to turn ON the UPS and activate certain functions when operated in combination
with other buttons (as described later in this chapter). The button must be pressed for approximately
one second to turn ON the UPS – accompanied by double ‘beep’.
This symbol shows that the ON button is also used to cancel the audible alarm. When the alarm is
cancelled, the audible warning will turn OFF but the alarm LED will remain ON if the fault is still present.
OFF Button
This button must be pressed for approximately one second to turn OFF the UPS – accompanied by
double ‘beep’.
ENTER Button
The ENTER button is used to select a parameter from the UPS monitoring and configuration menus.
UP (BACK) Button
This button is used to navigate UP through the UPS menus, or change a menu parameter. It is also
used with the ON button to manually transfer the load between the UPS and bypass supply.
DOWN (NEXT) Button
During normal operation, this button is used to scroll through the metered parameters shown on the
LCD display. It is also used in conjunction with the ON button to access the UPS configuration menus.
FUNCTION Button
This button is used to access the UPS configurations display menu.
ON
OFF
Enter
Function
INPUT UPS LOAD
Service
Overload
Utility
?
Wiring Fault Alarm
Bypass
Fault
Parallel ID Mode
KVA
WHz
Mins
%
C
Bypass Step
Utility Inverter
Voltage Adjust
Buzzer Code
Battery Autonomy
Frequency Window
Low
Testing
Warning symbols
Mimic diagram
Battery status
Metering parameters
3-Digit alpha-numeric display