Kohler PW1000 1 kVA, Руководство пользователя

Страница: 20 / 49

14
TS_600_00 PW1000 1-3kVA User Manual 6/4/17
3
Installation
3.1 Unpacking the UPS equipment
The manufacturer has designed robust packaging for your product to help ensure it reaches you in good order; however,
accidents and damage may sometimes occur during shipment. You should inspect the UPS carefully upon receipt and if
there are signs of damage you must inform the carrier and dealer immediately.
Save any recyclable packaging for re-use or dispose of it appropriately and correctly.
1. Remove the UPS from the packing carton.
2. Check the package contents. The standard unit includes:
a) User Manual.
b) IEC output cables (for UPS with IEC sockets only).
c) IEC input power cable (for UPS with IEC sockets only).
d) A UPS accessories kit which allows the UPS to be configured for Tower or Rack installation.
3. Before proceeding, check the data plate on the rear of the UPS and verify that the unit’s voltage and power ratings
comply with the equipment order details. Contact the dealer immediately if this is incorrect.
3.2 Selecting a suitable installation location
As the UPS weighs several kilograms, the location where it is to be installed must be able to safely support its weight.
To ensure correct operation and a long service life, always install the UPS in accordance with the following environmental
standards:
• The ambient temperature and humidity must be within the limits specified in Chapter 8 of this manual. The battery
temperature must be maintained at 20°C to ensure its lifespan is not reduced
• The UPS is not designed for outdoor use
• The installed location must be clean, dry and free of excessive dust
• The UPS must not be installed in a corrosive environment or in the vicinity of flammable items
• The ventilation grills at the front of the UPS and extractor fans at the rear of the UPS must not be obstructed
• The UPS equipment must be installed with the clearances illustrated in Figure 3.2 as a minimum
CAUTION: Read the safety information contained in chapter 1 before installing the UPS.
WARNING: Under no circumstances should you connect electrical power to a damaged unit or attempt to
start it using its internal batteries.