Kohler Mira Miniduo, Инструкция по установке и эксплуатации

Страница: 13 / 28

13
Adjustable Elbow Installation
1. Unscrew the elbow grubscrews on the
thermostatic mixer with a 2.5 mm hexagonal
key (supplied with the thermostatic mixer), pull
off the inlet elbows and discard.
2. Using the ‘O’ key (supplied with the thermostatic
mixer) or a 12 mm hexagonal key, unscrew the
inlet nipples and discard.
3.
Fit the new adjustable elbow inlet nipples and
tighten with the ‘O’ key.
4. Make sure that the ‘O’ seal is fitted and push the
new elbow fully onto the inlet nipple. Tighten
the grubscrew with a 2.5 mm hexagonal key.
5. Remove the backplate from the mixer by
removing the grubscrew with a 2.5 mm
hexagonal key.
6. Draw a centre line between the inlet pipework
and, using the adjustable backplate as a
template, mark the position of the adjustable
backplate fixing holes.
7. For solid walls drill the holes for the backplate
with a 6 mm drill and insert the wall plugs
(supplied). For other types of wall structure
alternative fixings may be required (not
supplied).
8. Secure the backplate to the wall using the
screws (supplied).
9. Align the mixer with the pipework and fit onto
the backplate.
Note!
Make sure that the pipes are pushed
fully into the inlet connectors.
10. Tighten the compression nuts onto the mixer
with a suitable wrench.
Caution! Take care not to damage the chrome
surfaces.
11. Tighten the adjustable backplate grubscrews
with a 2 mm hexagonal key (supplied) to
secure the mixer to the backplate.
Grubscrew
Inlet Elbow
‘O’ Key
Inlet Nipple
Backplate
Grubscrew
‘O’ Seal
Adjustable
Backplate
Adjustable
Elbow
11 mm
10 mm
Cutout