Kohler Lombardini LDW FOCS 502 Euro 2, Руководство по обслуживанию

Страница: 89 / 98

89
C
B
C
A
B
A
B
151
152
8
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
Warning
• Replacement may be carried out with the engine
installed on the machine.
1. Switch off the engine and leave to cool.
2. Disconnect the battery.
3. Disconnect the electrical connectors.
4. Loosen the nut (
A ).
5. Loosen the belt ( C ) by adjusting the alternator ( B )
manually.
6. Slip the belt ( C ) off the alternator pulley.
7. Remove the alternator and replace it with a new
one.
8. Insert the belt into the alternator pulley.
9. Regulate belt (
C ) tension (see “Replacing alternator
– fan belt”).
10. Reconnect the electrical connectors.
Warning
• Replacement may be carried out with the engine
installed on the machine.
1. Switch off the engine and leave to cool.
2. Disconnect the electrical connectors.
3. Remove the starter motor.
Important
• If in order to take care of the problem it is necessary
to remove the motor, please refer to an authorised
BOSCH service centre.
4. Install the starter motor ( A ) and tighten the screws.
5. Tighten the screws to a final torque of 40 Nm.
6. Make sure that the distance (
B
) is between
17,5÷19,5 mm.
7. Reconnect the electrical connectors.
8.6 REPLACING THE ALTERNATOR
8.7 REPLACING THE STARTER MOTOR
REPLACING PARTS