Kohler Lombardini LDW FOCS 502 Euro 2, Руководство по обслуживанию

Страница: 80 / 98

80
N
M
L
M
G1
131
132
133
7
Service Manual LDW FOCS 502 automotive _ cod. ED0053027270 - 3° ed_rev. 02
7.8.1 Assembling the fan belt drive pulleys
1. Check that all components are intact and, if necessary,
replace them with original spares.
2. Mount the pulley ( G1 ) and fasten the screws without
tightening them.
3. Tighten the screws in a crisscross pattern to a final
torque of 10 Nm.
7.8 INSTALLATION OF THE COOLING FAN BELT DRIVE
4. Mount tool “7107-1460-051” to inhibit rotation of the
crankshaft.
5. Apply some anti-seize product to the screw thread (
L
).
Warning
• The screw is left-handed. Turn anticlockwise to
screw.
6. Tighten the screw ( L ) to a torque of 180 Nm.
7. Remove the tool ( M ).
8. Install the starter motor ( N ) and tighten the screws to
a torque of 45 Nm.
INSTALLATION OF ASSEMBLIES