Care and Cleaning (cont.)
For best results, keep the following in mind when caring for your
KOHLER product:
•
Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
•
Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
•
Do not allow cleaners to soak on surfaces.
•
Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
•
For Artist Edition Toilets:
Treat your decorative product just as
you would treat your fine china. DO NOT use bristle brushes or
abrasive-backed sponges. They will scratch decorative surfaces.
Use only warm water to clean. Dry with a cotton cloth or soft
sponge.
For detailed cleaning information and products to consider, visit
www.kohler.com/clean. To order Care & Cleaning information, call
1-800-456-4537.
Troubleshooting
For service parts information, visit www.kohler.com/serviceparts.
Symptoms
Cause
Recommended Action
1.
Poor flush.
A.
Water level is
too low.
A.
The water line should
be at the level marked
on the left side of the
tank. Raise the water
level in the tank to the
marked waterline by
turning the white
knob on the fill valve
clockwise until the
water level reaches the
waterline marked in
the tank.
B.
Improper waste
line venting.
B.
Install venting to code.
Kohler Co.
17
1247365-2-B
