25
EN
Other pages
Shortly press the UP button (ref. 8, page 23) or the DOWN button (ref. 9, page 23) to open the other pages available in ATS45,
which are the following:
Page
Description
DPF MONITOR
- It displays the soot and ash percent load of the Diesel
Particulate Filter (DPF). It shows when DPF requires servicing.
From this page you can also disable automatic regeneration
and initiate a forced regeneration (see par. "Regeneration
management").
SCR SEVERITY
- It displays the SPN-FMI codes of any malfunctions related
to the SCR system (if any) which result in performance
degradation. The LEVEL 1 column shows how much time
remains until the first derating level is reached; the LEVEL
2 column shows how much time remains until the second
derating level is reached.
Warning
For further information about the “SCR system inducement
strategy”, please refer to the engine operation and
maintenance manual
.
SCR PAGE
- It shows the urea percent level and temperature in the tank
and any derating caused by problems of the SCR system
(if any).
ENGINE PARAMETERS
- It shows the instant fuel consumption, load percent and oil
pressure of the engine and the speed setpoint (RPM) that
ATS45 requires from the ECU.
PARAMETERS
- It shows the battery voltage, the fuel tank level, the water/
coolant temperature and the voltage supplied by the alternator.
DCU ERROR LIST
- It displays the SPN-FMI fault codes of the SCR system
Dosing Control Unit (DCU).
ECU ERROR LIST
- It displays the SPN-FMI fault codes of the Engine Control
Unit (ECU).
ATS45 FUNCTIONS
