Koganei ZL1 Series, Руководство пользователя

Страница: 6 / 14

Linear magnetic sensor controller
Specifications
Connector number
ZL1
●
Sensor head
Number on connector Signal name Lead wire color
1 Sensor head voltage (+) Sensor head brown lead
2 Sensor head voltage output A_IN Sensor head white lead
3 Sensor head voltage output B_IN Sensor head black lead
4 Indicator (LED) input Sensor head red lead
5 GND Sensor head blue lead
6 NC Unconnected
●
Power supply
Pin number Signal name Lead wire color
1 Power supply voltage input (24 V) Brown
2 Analog output (1 to 5 V) Gray
3 Effective measuring range signal output (STABI) Black
4 GND Blue
5 Switch output OUT1 White
6 Switch output OUT2 Red
7 Switch output OUT3 Green
8 Switch output OUT4 Yellow
●
Sensor head
Item
Model
ZLS1-
□
L
Power supply voltage 5 VDC
±
5%
Consumption current 20 mA MAX.
Mounting methods Embedded type
Operation indicator light Red LED lights at optimal sensitivity position (Operation position can be changed by settings)
Lead wires Heat-resistant, oil-resistant vinyl sheath instrumentation cable
φ
2.9 [0.114] 0.15 mm 2 5-lead with 6 P connectors
Insulation resistance 100 M
Ω
min. (at 500 VDC megger, between case and lead wire terminal)
Withstand voltage 500 VAC (50/60 Hz) 1 minute (between case and lead wire terminal)
Shock resistance 294.2 m/s
2
[30 G] (non-repeated)
Protective structure IP67
Vibration resistance 88.3 m/s
2
[9 G] (total amplitude of 1.5 mm [0.059 in], 10 to 55 Hz)
Ambient temperature 0 to 50
°
C [32 to 122
°
F] (non-condensation, non-freezing)
Storage temperature range -10 to 70
°
C [14 to 158
°
F] (non-condensation, non-freezing)
Mass 20 g [0.705 oz] (when 1 L lead wire length is 1000 mm [39 in])
●
Controller
Item Model
ZL1
Power supply voltage 24 VDC
±
10%
Consumption current 50 mA max. (not including supply power to sensor)
Sensor input supply power and voltage 5 VDC
Sensor input maximum input voltage 3.0 V
Switch output method NPN open collector output, 5 points
Load voltage 30 VDC
Load current 50 mA max.
Switch output volume repeatability
±
1% F.S.
±
1 digit
Note
Internal voltage drop 0.3 V max. (When Ic = 5 mA)
Response time 5 ms MAX.
Operation indicator light Lights red when each switch output is on
Value display % display within effective measuring range (4 digits, 2-color display: red and green)
Analog output voltage range 1 to 5 VDC (1 K
Ω
output impedance)
Analog output repeatability
±
1% of F.S (25
°
C
±
5
°
C [77
°
F
±
9
°
F])
Note
Insulation resistance 100 M
Ω
min. (at 500 VDC megger, between case and lead wire terminal)
Withstand voltage 500 VAC (50/60 Hz) 1 minute (between case and lead wire terminal)
Shock resistance 294.2 m/s
2
[30 G] (non-repeated)
Ambient temperature 0 to 50
°
C [32 to 122
°
F] (non-condensation, non-freezing)
Storage temperature range -10 to 70
°
C [14 to 158
°
F] (non-condensation, non-freezing)
Mass 40 g [1.411 oz]
Note: This performance excludes the mechanical looseness of a cylinder with a fixed magnet (standalone performance). In the case of a movable type cylinder whose magnet
is not fixed, the movable part and repeatability are degraded.
2
駆動機器図面
エアシリンダ 三校
850
旧版
7
03̲2016