Koganei ZL1 Series, Руководство пользователя

Страница: 2 / 14

Linear Magnetic Sensor Controller
Linear Magnetic Sensor Controller
●
Exchange with control devices is possible due to standard equipment for analog output (1 to 5 VDC).
●
Switch output is possible in four places. Simple position detection is possible.
●
Since the sensor head is the same shape as the ZE sensor switch, it is compatible with ac-
tuators equipped with the ZE sensor switch.
Output mode
■
Window comparator mode
■
Hysteresis mode
Sensor head
ZLS1-
□
L
Linear magnetic sensor controller
ZL1-
□
-
□
Senses the linear position of the cylinder within the specified range.
NOTE
For information about actuators on which the linear magnetic sensor
controller can be mounted, refer to "Compatible actuators" on page
847.
Switch output display
Indicator color is red
only.
4-digit LED display
The display color can
be changed to green or
red.
Display (%)
OUT1
LCD display
100
60
40
0F
Response differential (fixed)
t
Hand full open Holding workpiece Hand full open Hand full open
Response differential (fixed)
)
)
Effective setting
range signal
(STABI)
The ON range of each output can be set within the effective measuring range (sensor head ON range).
Response differential is fixed (2% F.S).
When the controller setting and sensor heat setting positions are as shown below.
OUT1 Threshold value setting Upper limit: 60 Lower limit: 40
Display when hand is full open: 90
Display (%)
OUT1
LCD display
CAUTION: When the effective measuring range signal is OFF (outside the measuring range), OUT also becomes OFF.
100
20
40
0F
t
Hand full open Holding workpiece Hand full open Hand full open
Effective setting
range signal
(STABI)
The ON position and OFF position each output can be set within the effective measuring range (sensor head ON range).
When the controller setting and sensor heat setting positions are as shown below.
OUT1 Threshold value setting Upper limit: 40 Lower limit: 20
Display when hand is full open: 90
2
駆動機器図面
エアシリンダ 三校
846
旧版
1
03̲2016