Page 27
Version 02-2010
LHR-2
Operation
9.
Throttle lever
The throttle lever is located on the right-hand steering shaft (see fig. 23).
Please ensure that it is adjusted correctly in accor-
dance with the engine manufacturer’s operating man-
ual.
Engine speed regulation according to type of use
(for minimisation of noise and vibration)
The engine speed can be read from the operating hour meter.
The following engine speed ranges are possible:
2,700 rpm – use with mowing bars
3,000 rpm – use with flail mowers
3,300 rpm – use with all-purpose mowers
10.
Shaft height adjustment
Caution!
Adjust the shaft only when the
2-wheen tractor is stationary!
Adjustment of the steering shaft height
The steering shaft height can be individually adjusted using lever C (see fig. 24). Pull lever C
back until the shaft guide is released from the latch. By releasing and latching lever C, the steer-
ing shaft can be locked further up or further down.
Fig. 23. Throttle lever positions.
Fig. 24. Steering shaft height adjustment.
Lever C