ADA5000 Automatic Distillation Analyzer
Operation and Instruction Manual
ADA5000-Manual
-
6 -
Restarting the program will create a folder with
shortcuts for the various programs used to
operate the distillation unit.
Also, upon restart,
the “Config” program will start automatically, and
you will be prompted to enter a username and
password.
The default username is “admin” and the default
password in “admin”.
From the “Config” program, you can configure
your system. After installation it is possible to
run this program and to change parameters as
necessary. Only use this program to change
parameters, and do not try to make changes in
the registry directly.
Select the “General” tab at the top of the screen.
It is not recommended to alter the various paths;
please consult with Koehler technical service.
To change the units for temperature
(1)
and
pressure
(2)
, select the desired units by clicking
on the corresponding radio buttons.
Registration
(3)
.
For demonstration you can
input “DEMO” in the company and serial number
fields. Upon starting the program, it will display
“Demo Version”. To register the program,
please input the company name and the serial
number exactly as listed on the registration code
on the CD label. It is important to input the
company name and serial number exactly as
written
; note that these inputs are case-
sensitive
. If not, an error message will appear
when starting Commgr.exe that the software
isn’t correctly registered.
Click on the “ComMgr” tab. Select which
analyzer is connected to the PC
(1)
. If the
“AutoSave” and “AutoPrint” features are desired,
select accordingly for each item
(2)
. Also, select
the communication port where the first analyzer
is connected
(3)
.
