ADA5000 Automatic Distillation Analyzer
Operation and Instruction Manual
ADA5000-Manual
-
15 -
Stop at Dry Point
Select “No“ to stop distillation run after detecting
dry point, or “Yes“ to wait for FBP.
Solvents off Time
Look at info on dry point on how to set this point.
Solvents off Temp
Look at info on dry point on how to set this point.
Fix-Temps
If a temperature is set, the according volume will
be shown.
Fix Temp 1-5
First 5 fix temperatures are generated in the
distillation analyzer and available after the
distillation run. These temperature points can be
written in print out form.
Fix Temp 6-100
These fix temperatures are stored in a memo
field of the database and are online available.
Program – Extended - Fix-Temps
Final Results
All important values are shown online here. That
means if the IBP was detected, it can be seen
immediately. After a distillation run has finished
(yellow lamp at front panel is off and level
follower is in the standby position), the residue
can be input to calculate the loss and
evaporated volume. “First 5ml“ and “Last 5ml“
will be calculated to check for a standard
distillation run.
Dist.Data
Volume, recovered temp., corrected temp.,
evaporated temp., dist rate and heat capacity
will be printed. Steps can be changed in “Config“
then “Menu“.
Graph
Temperature, heat and rate curves are shown
online during the distillation run. Scale of all 3
curves can be changed by pressing right mouse
button.
