Koden MDC-2240, Руководство по эксплуатации

Страница: 80 / 129

MDC-2200/2500 Series Chapter 4 Menu operations
0093125002-05 4-27
4.6 ATA/EPA menu
Following items provided for ATA/EPA Menu.
Refer to “3.15 Use ATA/EPA” for detail.
(1)Select ATA function or EPA function
Select ATA function or EPA function.
ATA (Automatic Tracking Aid) function enables to acquire manually (select target one by one) or
automatically (pre-defined area) up to 50 targets and to track automatically.
EPA (Electronic Plotting Aid) function enables to calculate course and speed of the target based on the
position data of 2 points which is once manually acquired and manually acquired again after at least 30
second passed. The targets up to 50 can be acquired.
(2) Manual target acquisition
Move cross cursor to point target to be acquired by using [Joystick].
Select acquisition menu then press [ENT] key. Symbol is displayed on cursor position.
“ ˮ mark is displayed just after acquisition then changes to ○ mark after about 30 seconds. Target
number is displayed near the target.
Manual acquisition can be performed easily by using [ACQ] key for (MDC-2500) or [Function] key for
(MDC-2200) on the operation panel. Refer to “3.15 Use ATA/EPA”.
(3) Select acquired target and delete it
Move cross cursor to point target to delete by using [Joystick].
Or, select target number to delete by using item (9) “Target selection”.
Select delete menu and press [ENT] key.
Delete operation can be performed by [OFF] key and [ACQ] key operation in addition to this procedure.
ATA
／
EPA TYPE
ACQ
DELETE
ALL DELETE
MAN ACQ NO
AUTO DETECT
TARGET ID
ID SIZE
TARGET SELECT
EPA UPDATE
DATA STYLE
Shaded display is displayed in detailed Menu.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
ATA / EPA
0 - 50
OFF / ON
SMALL / MID / LARGE
0 - 49
B/R / L/L